Joiner's works Joiner's works in rural mestosti Works of the joiner Work of the joiner in a countryside

External furnish

 
 

the Covering of walls. This work is carried out after full by deposits of walls, differently a covering can collapse.

The Covering do of boards of a different thickness - from 13 to 30 mm. To boards, or tesu, give the certain form that water getting on a covering did not become numb inside.

The Industry produces for a covering two types of boards in the thickness of 13 mm. The first type (a covering "т Ёѕё=шъ") - width of boards 49, 68, 88 and 118 mm (fig. 90, the second type (a covering "т °яѕэ=") width of boards 33, 62 and 82 mm (fig. 90,).

Kinds of the boards applied to an external covering of walls: and - "т Ёѕё=шъ"; - "т °яѕэ=" with skosom; in - "т яюыѕЁѕё=шъ"; g - "т a quarter with ёъюёюь"; d - "т a straight line ёх=тхЁі"; e - "т °яѕэ="; - "т яЁшяых=ъѕ"

90. Kinds of the boards applied to an external covering of walls :
And - "т Ёѕё=шъ"; - "т °яѕэ=" with skosom; in - "т яюыѕЁѕё=шъ"; g - "т a quarter with ёъюёюь"; d - "т a straight line ёх=тхЁі"; e - "т °яѕэ="; - "т яЁшяых=ъѕ"

To Rally covering boards it is possible also "т яюыѕЁѕё=шъ" "т ёх=тхЁ=і" "т a straight line ёх=тхЁ=і" "т °яѕэ=" "т яЁшяых=ъѕ" (fig. 90, v-zh). Crests shpuntovannyh boards direct upwards.

The Material to a covering apply dry, boards rally as it is possible more densely that the wind did not blow.

Covering Boards it is possible to have in any directions in relation to logs. A covering it is recommended krepit not to logs, and on special bruskam, beaten to walls strictly vertically or horizontally. Bruski krepjat 1500 mm one from another and so that they did not disturb possible a house deposit are not more rare. For this purpose in bruskah cut three-four through apertures in length of 200-250 mm, thickness on diameter of applied thick nails or crutches. Under hats of nails necessarily enclose washers. Nails or crutches hammer into walls not up to the end that at a deposit of walls they have fallen downwards apertures. For the bottom nail it is possible not to cut an aperture, it drive in up to the end because the bottom log does not fall (fig. 91).

the Design burska for fastening to it of a covering: 1 - brusok; 2 - a groove; 3 - a nail or a crutch with a washer

91. A design burska for fastening to it of a covering :
1 - brusok; 2 - a groove; 3 - a nail or a crutch with a washer

Each board of a covering beat to bruskam two nails with hats zapodlitso or drowned in wood.

The Executed covering paint oil paints, preliminary proolifiv and ogruntovav.

Instead of a tree it is possible to apply flat asbestotsementnye sheets. They are durable and nesgoraemy. Sheets to bruskam krepjat end-to-end or vnahlestku nails for what on corners of sheets bore through apertures. At packing of sheets end-to-end seams between sheets cover with putty, it is more reliable to coat with putty of an edge of sheets before joining. The laid sheets can be painted any paint.